Recent Jobs For United Fire & Water
July 18, 2024 | Baton Rouge, LA
After demolition, we installed high-powered drying and air purification equipment to stabilize humidity levels and eliminate any airborne contaminants. Following IICRC-approved drying standards, we thoroughly dried the impacted areas to prevent mold growth and further structural damage. The use of air scrubbers also helped remove particles and improve indoor air ...
July 18, 2024 | Baton Rouge, LA
After removing the damaged materials, we thoroughly HEPA vacuumed and disinfected all affected areas to remove debris and microbial particles. Special attention was given to the slab surface where visible mold and mildew were present. A hospital-grade antimicrobial solution was applied to eliminate bacteria and reduce the risk of future ...
July 16, 2024 | Baton Rouge, LA
The first step in the mitigation process involves the removal of all affected materials, including wet insulation, damaged sheetrock, and any saturated wood components. We will then proceed with a controlled drying process, using commercial-grade equipment to bring the structure to an IICRC-approved standard of dryness. Air purifying equipment will ...
July 11, 2024 | Zachary, LA
Once the area was secured and drying equipment was operational, our next step involved the removal of damaged materials. This included any soaked carpets, drywall, and other items that could not be salvaged. Following the extraction of these materials, our team conducted a thorough cleaning and sanitization of the affected ...
July 10, 2024 | Baton Rouge, LA
The initial steps involved coordinating with IEH for soot testing and developing a remediation protocol, scheduled for May 1st or 2nd. Simultaneously, a meticulous pack-out of the home's contents commenced, requiring ozone treatment and thorough cleaning. Salvageable clothing and window treatments were treated with ozone and sent for professional dry ...
July 2, 2024 | Baton Rouge, LA
Our team performed an initial sanitization of the affected bathroom to begin the mitigation process. To help control moisture and humidity issues that contributed to the mold growth, we installed a new roof turbine and re-routed the vent duct through the roof for improved ventilation. In addition, Duct Dr completed ...
June 23, 2024 | Baton Rouge, LA
Quick update on your project: UFW removed the carpet in the bedroom, removed the damaged sheetrock and treated the sheathing and joists in the ceiling, and got the bad mattress out of the space. We also opened the air vents. Drying is progressing well, and we should be out of ...
June 18, 2024 | Baton Rouge, LA
1) Remove affected materials 2) Dry to an IICRC approved standard 3) Place air purifying equipment 4) Clean and sanitize area 5) Ready space for repairs Water Damage- Pipe Burst- Plumbing Leak
June 17, 2024 | Baton Rouge, LA
1) Set Containment 2) Remove affected drywall 3) Set Drying Equipment 4) Dry to an IICRC approved standard 5) Clean and sanitize 6) Ready space for repairs
June 17, 2024 | Hammond, LA
After successfully extracting the water in Hammond, LA, the restoration team performed a 2-foot flood cut around the entire room to remove any damaged materials that may harbor moisture. This step is vital in ensuring that the affected areas are completely dried and prepared for repairs. Following the flood cut, ...
June 14, 2024 | Denham Springs, LA
This water damage restoration job took place in Denham Springs, where a customer had a line that was broke behind the wall, leading to wet cabinets and wet carpet. The restoration process began with setting up containment measures to prevent further spread of damage. Drying equipment and air purifying equipment ...
June 12, 2024 | St Gabriel, LA
United Fire and Water went out with our moisture meter and our extraction truck. We did not have to extract any water due to it soaking up into the walls and floors. UFW removed any water the was left and we did a 2ft flood cut around the rooms that ...
June 12, 2024 | St Francisville, LA
Fire originated from a grease fire in kitchen. Soot damage spread throughout the first and second floors. Heaviest damage in kitchen. All rooms on both floors affected Next steps: 1) Contacted IEH for soot testing and protocol to be performed on 5/1 or 5/2. 2) Contents packet out to begin. Need Ozone and cleaning. ...
June 12, 2024 | Baton Rouge, LA
1) Remove affected sheetrock, base and vanity. Remove saturated insulation on exterior wall. 2) Place drying equipment and dry to an IICRC approved standard. 3) Clean and sanitize affected areas. 4) Ready space for repairs Water Damage- Busted Copper Line In Wall- Wet Sheetrock
June 10, 2024 | Gonzales, LA
The next steps in the restoration process included contacting IEH for professional soot testing and protocol guidance, scheduled for May 1st or 2nd. To ensure thorough cleaning, contents from the affected areas were packed out to begin the remediation process. Items such as salvageable clothing and window treatments will be ...
Total: 750
